Simrad MX525A Specifiche Scaricare il pdf (Pagina 12)

Installation | 11

Antenna Mounting

Bracket Mount

The MX521A mounting thread is an industry standard

fitting for VHF antenna mounting (1inch, 14 TPI). This

enables the antenna to be mounted on a wide range of

mounting brackets, including the swivel joints, commonly

used for angled surface. Refer to the figure below for

bracket mounting illustration.

Hand-tighten the antenna onto the bracket until snug.

Do not overtighten.

A 10-pin (male) plastic connector is mounted at the

underside of the antenna for power and data connection.

MX521A Bracket Mounting

Surface Mount

The MX521A can also be surface-mounted. Make

sure there is at least 5-inch clearance underneath the

mounting surface to accommodate the lower section of

the MX521A housing, connector and cable. Refer to the

figure below for surface mounting considerations. Cut a 5

Mounting

Surface

1” Diameter/14 TPI

Metal Mounting

Bracket

(not supplied)

Drill 1/2” diameter hole

for cable access

Secure cable

with plastic

tie-wraps

(not supplied)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 33 34

Nessun commento

Simrad MX525A Specifiche Pagina 12